Supero C7Z270-PG User Manual

Chapter 4: AMI BIOS
4-41
GT Extra Turbo Voltage
(if Adaptive is selected above) Use this feature to set the extra voltage
applied while GT is operating in trubo mode. Specify a value from 0mV
to 2000mV. Enter 0 to use the manufacture default value.
GT Voltage Offset
(if Offset is selected above) Use this feature to set the GT Adaptive
voltage Target(mV) value from 0mV to 2000mV. Enter 0 to use the
manufacture default value.
Offset Prex
Use this feature to set the Offset value as a positive (+) number or
a negative (-) number. The default setting is "+".
GT-UnSliced VR Settings
GT-UnSliced Domain
VR Cong Enable
Select Enable to activate VR conguration options. The options are
Enabled and Disabled.
AC Loadline
AC Loadline is dened in 1/100 mOhms and uses the BIOS mailbox
command 0x2. A value of 100 equals 1.0 mOhm, and 1255 is 12.55
mOhms. Range is 0-6249 (0-62.49 mOhms). Enter 0 for AUTO.
DC Loadline
DC Loadline is dened in 1/100 mOhms and uses the BIOS mailbox
command 0x2. A value of 100 equals 1.0 mOhm, and 1255 is 12.55
mOhms. Range is 0-6249 (0-62.49 mOhms). Enter 0 for AUTO.
PS Current Threshold1
The PS Current Threshold1 is dened in 1/4A (Amperes) increments
and uses the BIOS mailbox command 0x3. A value of 400 equals
100A. Range is 0-512 which translates to 0-128A. Enter 0 for AUTO.
Default is 80 for 20A.

Supero C7Z270-PG Specifications

General

Brand	Supero
Model	C7Z270-PG
Category	Motherboard
Language	English