Supero C7Z270-PG - D-2 Steps to Reboot the System by switch JBR1

D-2
Supermicro C7Z270-PG Motherboard User’s Manual
D-2 Steps to Reboot the System by switch JBR1
1. Power down the system.
2. On switch JBR1 slide switch to ON, and power on the system.
3. Follow the BIOS recovery SOP listed in the previous chapter (Appendix C).
4. After completing the steps above, power down the system.
5. Turn OFF switch JBR1, and power on the system.