Supero C7Z270-PG User Manual

Chapter 4: AMI BIOS
4-15
Core PLL Voltage Offset
Use this feature to set the CPU PLL Voltage Offset value from 0-63
with each unit at 15mV. This is used to increase the range of the core
frequency in extreme overclocking conditions. Enter 0 to use the manu-
facturer default value.
Ring Max OC Ratio
Use this feature to set the maximum overclocking ratio for the RING
Domain. Select a value.
Ring Min OC Ratio
Use this feature to set the minimum overclocking ratio for the RING
Domain. Select a value.
Uncore Voltage Offset
Use this feature to specify the Offset Voltage applied to the Uncore do-
main. Select a value.
Offset Prex
Use this feature to set the offset value as positive or negative. The op-
tions are + or -.
PCH Voltage
Use this feature to trim the PCH Voltage. Select from these values:
1.00V, 1.05V, 1.10V, 1.15V, 1.20V, 1.25V and 1.30V.
CPU PLL Voltage
Use this feature to trim the CPU PLL Voltage. Select from these values:
1.20V, 1.25V, 1.30V, 1.35V, 1.40V, 1.45V and 1.50V.
CPU_IO Voltage
Use this feature to calibrate the CPU I/O Voltage. Select from these
values: 0.975V, 1.15V, 1.30V and 1.50V.
Load Line Calibration
Load line calibration is vDroop, which is the tendency for a CPU's vCore
to drop when going from an idle state to a load state. Enable this feature
to reduce vDroop. The options are Disabled and Enabled.
PSYS Slope

Supero C7Z270-PG Specifications

General

Brand	Supero
Model	C7Z270-PG
Category	Motherboard
Language	English