Chapter 4: AMI BIOS
4-53
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE (Preboot Execution Environ-
ment) for boot support. If this feature is set to Disabled, Ipv6
PXE boot option will not be supported. The options are Enabled
and Disabled.
Security
This menu allows the user to congure the following security settings
for the system.
• If the Administrator password is dened ONLY - this controls access
to the BIOS setup ONLY.
• If the User's password is dened ONLY - this password will need to
be entered upon each system boot, and will also have Administrator
rights in the setup.
• Passwords must be at least 3 and up to 20 characters long.
Administrator Password
Use this feature to set the Administrator Password which is required
to enter the BIOS setup utility. The length of the password should be
from 3 characters to 20 characters long.
To Next Page
Loading...
Need help?
General
