Chapter 1
Introduction
1-1 Overview
The SUPERSERVER 7047R-TRF is a high-end server comprised of two main
subsystems: the SC745TQ-R920B 4U/tower chassis and the X9DRi-F serverboard.
Please refer to our web site for information on operating systems that have been
certifi ed for use with the system (www.supermicro.com).
In addition to the serverboard and chassis, various hardware components have
been included with the 7047R-TRF, as listed below:
• Two (2) passive CPU heatsinks (SNK-P0048PS)
• Three (3) 8-cm system fans (FAN-0074L4)
• Two (2) 8-cm rear exhaust fans (FAN-0082L4)
• One (1) air shroud (MCP-310-49001-0N)
• One (1) 20" front control 16-to-16 pin ribbon cable (CBL-0087)
• Four (4) 200 mm 4-to-4 Pin Middle Fan Power Extension cables (CBL-0216L)
• SAS Accessories
One (1) SAS backplane (BPN-SAS-743TQ)
Two (2) 40-cm 8-to-8-pin ribbon cable w/tube for SGPIO (CBL-157L)
Six (6) 35-cm SATA cables (CBL-0061L)
Eight (8) 3.5" drive trays (MCP-220-00092-0B)
• One rackmount kit (Optional: CSE-PT26)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your server.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety information:
http://super-dev/about/policies/safety_information.cfm
• If you have any questions, please contact our support team at:
support@supermicor.com
Chapter 1: Introduction
1-1
To Next Page
Loading...
General