7-26
SUPERSERVER 7047R-TRF USER'S MANUAL
7-8 Save & Exit
This menu allows the user to confi gure the Save and Exit settings for the system.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes
to the system confi guration, and reboot the computer. Select Discard Changes and
Exit, and press <Enter>. When the dialog box appears, asking you if you want to exit
the BIOS setup without saving, click Yes to quit BIOS without saving the changes,
or click No to quit the BIOS and save changes.
Save Changes and Reset
When you have completed the system confi guration changes, select this option to
save the changes and reboot the computer, so that the new system confi guration
parameters can take effect. Select Save Changes and Exit, and press <Enter>.
When the dialog box appears, asking you if you want to exit the BIOS setup without
saving, click Yes to quit BIOS without saving the changes, or click No to quit the
BIOS and save changes.
Save Options
Save Changes
Select this option and press <Enter> to save all changes you've done so far and
retun to the AMI BIOS utility Program. This will not reset (reboot) the system. When
the dialog box appears, asking you if you want to save confi guration, click Yes to
save the changes, or click No to return to the BIOS without making changes.
Discard Changes
Select this feature and press <Enter> to discard all the changes and return to the
BIOS setup. When the dialog box appears, asking you if you want to load previ-
ous values, click Yes to load the values previous saved, or click No to keep the
changes you've made so far.
Restore Defaults
Select this feature and press <Enter> to load the default settings that help optimize
system performance. When the dialog box appears, asking you if you want to load
the defaults, click Yes to load the default settings, or click No to abandon defaults.
Save As User Defaults
Select this feature and press <Enter> to save the current settings as the user's
defaults. When the dialog box appears, asking you if you want to save values as
user's defaults, click Yes to save the current values as user's default settings, or
click No to keep the defaults previously saved as the user's defaults.
To Next Page
Loading...
General