Installation and Commissioning
2-4
2.2.3 Side View, Mounting Depth
2.2.3.1 Standard Device
Figure 2-3 Side view and mounting depth for the standard device
1 Front Panel
2 Circumferential Seal
3 Press-in Threaded Bolt M4 x 18 mm (0.709")
4 Mounting Surface Thickness 1 mm to 8 mm (0.039" to 0.315")
5 Spring Lock Washer B4 DIN 127 Form B (not supplied)
6 Nut M4 DIN 934 (not supplied)
To Next Page