Need help?Do you have a question about the Sutron TesiMod TP22 and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| Resolution | 800 x 600 pixels |
| Touchscreen | Yes |
| Operating Temperature | -20°C to +60°C |
| Communication Ports | RS-232, RS-485, Ethernet |
| Touch Technology | Resistive |
| Brightness | 400 cd/m² |
| Contrast Ratio | 500:1 |
| Storage Temperature | -30°C to +70°C |
| Power Consumption | 15W |
| Weight | 2.5 kg |
| Enclosure | IP65 |
| Interface | Ethernet |
| Certifications | CE, FCC |
Provides essential safety instructions for operating the device.
Details on physical mounting, clearance, and torque specifications.
Details how to connect the 24 V DC supply voltage to the device.
Describes the power-on sequence and initial display behavior.
Explains how to operate the device using the resistive touch screen.
Details how to set contrast and brightness levels for the display.
Details pin assignments and functions for the TTY/20mA current loop interface.
Provides pinout and function details for the RS485 interface.
Details pinout and functions for the RS232 interface on SER1.
Details pinout and functions for the RS232 interface on SER2.
Introduces the CAN bus interface and its integration capabilities.
Provides the pinout configuration for the CAN bus connectors.
Introduces the DeviceNet interface for integration into CAN structures.
Provides the pinout configuration for the DeviceNet connectors.
Details integration into INTERBUS networks via available interfaces.
Provides pinout configurations for INTERBUS remote bus in/out.
Describes integration into INTERBUS networks using optical fiber.
Details integration into Siemens MPI bus structures.
Details integration into PROFIBUS-DP networks.
Step-by-step guide for changing the device's internal battery.
Provides electrical specifications such as supply voltage and power consumption.
To Next Page