Technical Data
6-4
Standards and Guidelines
Interference Immunity EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-2
Emitted Interference EN 50081-1
EN 55022
Equipment Requirements EN 61131
Storage and Transportation EN 61131 Part 2
Power Supply EN 61131 Part 2
Electromagnetic Compatibility 89/336/EEC (Including all Applicable Amendments)
Degree of Protection EN 60529
Impact Load, Shocks EN 60068 Part 2-27
Sinusoidal Vibrations EN 60068 Part 2-6
Corrosion Protection IEC 60068
Enclosure and Front Panel
Enclosure Steel Sheet, Galvanized
Front Panel Aluminium, Varnished
152 mm x 220 mm x 5 mm (H x W x D) - (5.984" x 8.661" x
0.197")
Front Panel Cover Polyester Foil
Seal Circumferential Seal on the Rear
Mounting Cutout 140 mm x 196 mm (H x W) - (5.512" x 7.717"
Mounting Depth Standard Device: Approx. 48 mm (1.89") - (without Connector)
Field Bus Device: Approx. 70 mm (1.756") - (without Connec-
tor)
Degree of Protection At the Front: IP65
At the Rear: IP20
Total Weight Approx. 1100 g
To Next Page
Loading...