Suunto EON - Sample Rate; Standby and Deep Sleep; Surface and No-Fly Time

When the diver ascends above the deepstop window ceiling - in this case above 14.2 m
(46.6 ft) - a downward pointing yellow arrow signals that the depth is not optimal, it is
recommended to descend. The deepstop target depth number also turns yellow.
If the diver keeps ascending, after 0.5 m (1.6 ft), a downward pointing red arrow and an alarm
notify the diver to descend immediately. The deepstop calculation keeps running for another
1.5 m (4.9 ft) up but stops after that. In the above example it stops at 12.2 m (40.0 ft).
NOTE: For safety reasons, you cannot switch o deepstops if helium (trimix gas
mixtures) is enabled for the dive mode in use. When helium is not in use, deepstops can be
turned on and o. However, it is recommended that you turn deepstops on for all dives. If
deepstops are turned on but omitted during a dive, it will aect your next dive which will be
more conservative.
4.31. Sample rate
Suunto EON Steel Black uses a fixed sample rate of 10 seconds for all log recordings.
4.32. Standby and deep sleep
Standby and deep sleep are two functions that are designed to prolong battery life. Standby
is an adjustable setting that turns o the screen after a set amount of time to save battery if
Suunto EON Steel Black is not used.
To adjust the standby time:
1. Keep the middle button pressed to enter the menu.
2. Browse to General » Device settings » Standby.
3. Press the middle button to enter Standby.
4. Scroll up/down to select the desired standby time in minutes.
5. Press the middle button to save changes and return to the Device settings menu.
6. Keep the middle button pressed to exit.
Deep sleep
Deep sleep is a function that prolongs battery life when Suunto EON Steel Black has not been
used for some time. Deep sleep is activated when two days have passed since:
•
No buttons have been pressed
•
Dive calculation has ended
Suunto EON Steel Black wakes up when it is connected to a PC/charger, when a button is
pressed, or when the water contact gets wet.
4.33. Surface and
no-fly time
After a dive, Suunto EON Steel Black displays surface time since the previous dive and a
countdown time for the recommended
no-fly time. During the no-fly time you should avoid
flying or traveling to higher altitude.
Suunto EON Steel Black
44