Suunto EON - Using Your Suunto Dive Computer

5. Use
5.1. How to access device info
To access Suunto EON Steel Black information:
1. Keep the middle button pressed to enter the main menu.
2. Scroll to General with the upper or lower buttons and press the middle button.
3. Press the middle button to enter About EON.
4. Scroll to EON info, press the middle button to enter. You can check device software
version, serial number, etc. there.
5. Scroll with the lower button to see all information.
6. Keep the middle button pressed to go back and exit from the menu.
5.2. How to change display brightness
To change brightness level:
1. Go to General » Device settings » Brightness.
2. Select from default, high, or low.
3. Turn the display brightness down to save battery life
significantly.
5.3. How to set language and unit
To change the device language and unit system:
1. Go to Main menu » General » Device settings » Language and select your language.
2. Go to Main menu » General » Device settings » Units & formats.
3. Select Date format, Units, or Time format.
4. Use the upper or lower button to select from the available formats.
NOTE: Under unit settings, you have the option of selecting metric or imperial as a
global setting: it will aect all measurements.
5. To set the unit system for
specific measurements, select Advanced. For example, you can
use metric for depth, and imperial for tank pressure.
5.4. How to set time and date
To change time and date
Suunto EON Steel Black
48