WARNING: Do not disassemble or remodel Suunto USB Cable in any way. Doing so may
cause an electric shock or
fire.
WARNING: Do not use Suunto USB cable if cable or parts are damaged.
WARNING: You must only charge your device using USB adapters that comply with the
IEC 62368-1 standard and have a maximum output of 5 V. Non-compliant adapters are a fire
hazard and a risk to personal injury and might damage your Suunto device.
CAUTION: DO NOT allow the connector pins of the USB cable to touch any conductive
surface. This may short circuit the cable, making it unusable.
Emergency ascents
In the unlikely event that the dive computer malfunctions during a dive, follow the emergency
procedures provided by your
certified dive training agency to immediately and safely ascend.
Suunto EON Steel Black
9
To Next Page
Loading...
