EasyManuals Logo

Suzhou Monarch Control Technology MCTC-GCB-A User Manual

Default Icon
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
NICE3000 User Manual Function parameter description
129
The lift will return to the landing when the system is in re landing state.
F6-04
Stop landing Default 1 Min. Unit 1
Setting Range The lowest landing(F6-01)The highest landing(F6-00)
When lift is in stopping state, it will return to this landing after completing control box command.
Function code Name Default Min. Unit Setting Range
F6-05 service oor 1 65535 1 065535
F6-06 service oor 2 65535 1 065535
F6-05 set what kind of oors command lift respond in oors 1~16. F6-06 set what kind of oors
command lift respond in oors 17~31.
The setting way of F6-05 service oor 1:
The oor service is controlled by binary system number of 16 bit. The binary system number
express the floor 1~16 from l
ow bit to high bit, The setting relevant bit 1express that lift
responds to this oors calling, and the setting relevant bit 0 express that lift doesnt respond
to this oors calling. For example, oors in need of service are listed as follows:
Binary
digit
Relevant
oor
Service
or not
Binary bit
setting
Binary
digit
Relevant
oor
Service
or not
Binary bit
setting
Bit0 Floor 1 ON 1 Bit8 Floor 9 OFF 0
Bit1 Floor 2 OFF 0 Bit9 Floor 10 ON 1
Bit2 Floor 3 ON 1 Bit10 Floor 11 ON 1
Bit3 Floor 4 ON 1 Bit11 Floor 12 OFF 0
Bit4 Floor 5 ON 1 Bit12 Floor 13 ON 1
Bit5 Floor 6 ON 1 Bit13 Floor 14 ON 1
Bit6 Floor 7 ON 1 Bit14 Floor 15 ON 1
Bit7 Floor 8 OFF 0 Bit15 Floor 16 ON 1
The relevant binary digit setting is added in the list. The binary bit is 1111011001111101,and the
relevant algorism number is 63101,so F6-05 should be set as 63101.
The setting way of F6-06 is the same with F6-05.
F6-07
Group control number Default 1 Min. Unit 1
Setting Range 18
It can be used to choose lift number of group control:
1 Single lift running
22 parallel lift running
3~8: Group control running (need the cooperation of group control panel MCTC-GCB-A)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzhou Monarch Control Technology MCTC-GCB-A and is the answer not in the manual?

Suzhou Monarch Control Technology MCTC-GCB-A Specifications

General IconGeneral
BrandSuzhou Monarch Control Technology
ModelMCTC-GCB-A
CategoryController
LanguageEnglish

Related product manuals