Suzhou Monarch Control Technology MCTC-GCB-A User Manual

NICE3000 User Manual Structure of the control system and the component introduction
37
3.3 Direction for use of HCB
HCB is one of important interfaces that are used to connect NICE3000 controller to users. HCB
can accept user’s call-up and show lift’s current oor, running direction and so on. At the
same time HCB can be used for car cage displaying panel (the detail is shown in section 9.3.3).
HCB is diversified. In order to meet all kinds of needs, it is classified into several differ
ent forms,
whose types are: MCTC-HCB-B no display output hall call; MCTC-HCB-F vertical dot-matrix
hall call; MCTC-HCB-H and MCTC-HCB-J. horizontal dot-matrix hall call. We will only introduce
the using method and attention items of MCTC-HCB-H, MCTC-HCB-F, and MCTC-HCB-J.
3.3.1 MCTC-HCB-B
The hall call board HCB is one of the main interfaces between the NICE 3000 controller and
users
in order to meet
the needs of different customers and enrich the product range, we develop the
non-display hall call board – MCTC-HCB-B
3.3.1.1External view
Fig 3-7 External view of MCTC-HCB-B

Suzhou Monarch Control Technology MCTC-GCB-A Specifications

General

Brand	Suzhou Monarch Control Technology
Model	MCTC-GCB-A
Category	Controller
Language	English