Suzuki ACROSS - Page 34

33
2
2-2. Connectivity settings
Basic function
1 Display the Bluetooth
®
settings
screen. (P.30)
2 Follow the steps in “Connecting
a Bluetooth
®
device” from step
2. (P.31)
■ Reconnecting the Bluetooth
®
phone
If a Bluetooth
®
phone is discon-
nected due to poor reception from
the Bluetooth
®
network when the
power switch is in ACC or ON, the
system automatically reconnects
the Bluetooth
®
phone.
Up to 5 Bluetooth
®
devices can be
registered.
Bluetooth
®
compatible phones
(HFP) and audio players (AVP) can
be registered simultaneously.
This operation cannot be performed
while driving.
1 Display the Bluetooth
®
settings
screen. (P.30)
2 Select “Add new device”.
 When another Bluetooth
®
device
is connected
 To disconnect the Bluetooth
®
device, select “Yes”.
 When 5 Bluetooth
®
devices have
already been registered
 A registered device needs to be
replaced. Select “Yes”, and
select the device to be replaced.
3 Follow the steps in “Registering
a Bluetooth
®
phone for the first
time” from step 5. (P.26)
This operation cannot be performed
while driving.
1 Display the Bluetooth
®
settings
screen. (P.30)
2 Select “Remove device”.
3 Select the desired device.
4 Select “Yes” when the confirma-
tion screen appears.
5 Check that a confirmation
screen is displayed when the
operation is complete.
● When deleting a Bluetooth
®
phone,
the contact data will be deleted at the
same time.
The Bluetooth
®
device’s informa-
tion can be displayed on the
Registering a Bluetooth
®
device
Deleting a Bluetooth
®
device
Editing the Bluetooth
®
device information