Suzuki drz 400E Service Manual

2-18 PERIODIC MAINTENANCE
BRAKES
Inspect initially at five hours of operation and every
30 hours thereafter.
BRAKE PADS
The extent of brake pad wear can be checked by observing the
grooved limit line 1 on the brake pad. When the wear exceeds
the grooved limit line, replace the pads with new ones.
(
6-46 and 6-55)
Replace the brake pads as a set, otherwise braking per-
formance will be adversely affected.
BRAKE PEDAL HEIGHT
Loosen the locknut 1.
Adjust the brake pedal height by turning the push rod 2 until
the pedal is 5 mm (0.2 in) A below the top face of the footrest.
Tighten the locknut 1 securely.
Brake pedal height: 5 mm (0.2 in)
1
1
1
2
A

Suzuki drz 400E Specifications

General

Displacement	398 cc
Compression Ratio	12.2:1
Ignition	Electronic ignition (CDI)
Transmission	5-speed constant mesh
Rear Suspension	Link type, coil spring, oil damped
Front Tire	80/100-21
Rear Tire	110/100-18
Engine Type	4-stroke, DOHC
Bore x Stroke	90.0 mm x 62.6 mm
Fuel System	Mikuni BSR36 carburetor
Front Brakes	Disc
Rear Brakes	Disc
Fuel Tank Capacity	10.0 L (2.6 US gallons)
Overall Width	825mm (32.5 inches)
Ground Clearance	315 mm (12.4 in)
Seat Height	935 mm (36.8 in.)
Curb Weight	138 kg (304 lbs)
Dry Weight	119 kg (262 lbs.)