CHASSIS
5-28
REASSEMBLY
Reassemble and remount the rear wheel and rear brake in
the reverse order of disassembly and removal, and also carry
out the following steps.
the
BEARING
Apply grease to the bearings before installing.
Install the bearings by using the special tool.
Insert the bearing by using the special tool.
Apply grease to the mounting drum as shown.
99000-25010: Super grease ”A”
99000-25010 Super grease ”A”:
First install the bearing for right side.
09913-70210 Bearing installer:
REAR SPROCKET MOUNTING DRUM
09940-53311 Bearing installer:
SPROCKET
Tighten the four nuts to specified torque.
Do not reuse the removed nuts, replace the nuts with
new ones for safe riding.
Sprocket lock nut: 18~28 N•m
To Next Page
Loading...
