EasyManua.ls Logo

Suzuki GN125F - Chassis and Engine Mounting Bolts and Nuts; Lighting and Signal

Suzuki GN125F
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC MAINTENANCE
2-15
Inspect initial 1 000 km and every 5 000 km
REAR ABSORBER
LIGHTING AND SIGNAL
Inspect the headlight, left and right turn signal light, tail light /
brake light and dashboard signal light, replace the light if there
is something unusual. (Refer to page 6-7)
Press the rear carrier, move the rear absorber up and down
four or five times to check for the noise or smooth movement.
Inspect the rear absorber spring for damage, deformation or
oil leakage.
CHASSIS AND ENGINE MOUNTING BOLTS AND NUTS
Inspect initial 1 000 km and every 5 000 km
The nuts and bolts listed are important parts, and they must be in good condition for safety. They must be
re-tightened, as necessary, to the specified torque with a torque wrench.
ITEM
N•m
Kg m
1
Front axle nut
Front brake caliper mounting bolts
2
Brake hose union bolt
3
4
Front brake disc mounting bolts
5
Front absorber cap bolts
6
Handlebar clamping bolts
7
Steering bolt
Lower bracket bolts (front absorber clamp bolts)
8
9
Rear absorber fitting nuts
10
Rear axle nut
11
Rear brake cam lever bolt
13
Engine mounting bolts
Engine hanging nuts
14
12
16
Rear swing arm shaft nut
Exhaust pipe bolt
15
Rear torque link bolts
36-52
18-28
20-25
18-28
35-55
12-20
35-55
25-35
22-35
50-80
6-8
33-39
22-33
10-16
50-80
11-15
3.6-5.2
1.8-2.8
2.0-2.5
1.8-2.8
3.5-5.5
1.2-2.0
3.5-5.5
2.5-3.5
2.2-3.5
5.0-8.0
0.6-0.8
3.3-3.9
2.2-3.3
1.0-1.6
5.0-8.0
1.1-1.5

Table of Contents

Related product manuals