CHASSIS
5-10
OIL SEAL
Install the oil seal to the outer tube by using the special
tool as shown.
09940-50112: Absorber oil seal installer
Apply Super Grease lightly on the oil seal lip.
Upside
Downside
FRONT ABSORBER SPRING
When installing the front fork spring, the close pitch end
should position upside.
FRONT ABSORBER INNER SCREW PLUG
Install the front absorber inner screw plug and tighten it.
CAUTION
ABSORBER OIL
Absorber oil type: # 32
Pour the specified absorber oil into the inner tube.
Front absorber oil capacity (each leg): 168±3 ml
Hold the front absorber vertical and adjust the absorber oil
level with the special tool.
When adjusting the absorber oil level, compress the
inner tube fully without the absorber spring.
09943-74111: Front absorber oil level gauge
Absorber oil level: 166 mm
CAUTION
To Next Page
Loading...
