Engine Mechanical: 1D-35
Generator
Remove the generator component parts (1). Refer to
“Generator Removal and Installation in Section 1J
(Page 1J-5)”.
Starter System
Remove the starter idle gear No.1, No.2, and starter
driven gear. Refer to “Starter Clutch Removal and
Installation in Section 1I (Page 1I-9)”.
Transfer Gearshift System
Remove the transfer gearshift related parts. Refer to
“Transfer Gearshift Shaft No. 2 / Gearshift Cam Plate
Removal and Installation (LT-A400/F) in Section 3C
(Page 3C-17)”.
Transfer Drive Gear No.2
1) Remove the transfer drive gear No.2 (1) by removing
the snap ring.
Special tool
: 09900–06107 (Snap ring pliers)
2) Remove the spacer (2).
Oil Filter
Remove the oil filter with the special tool.
Special tool
(A): 09915–40610 (Oil filter wrench)
1
I827H1140099-01
I827H1140100-02
I827H1140101-02
I827H1140103-02
2
I827H1140254-02
(A)
I827H1140105-01
To Next Page
Loading...
