1K-3 Exhaust System:
• Tighten the Exhaust pipe nuts (3) and exhaust pipe
mounting bolt (4) to the specified torque.
Tightening torque
Exhaust pipe nut (a): 18 N·m (1.8 kgf-m, 13.0 lb-ft)
Exhaust pipe mounting bolt (b): 23 N·m (2.3 kgf-
m, 16.5 lb-ft)
• Install the muffler.
• Tighten the muffler mounting bolts (5) and muffler
connecting bolt (6) to the specified torque.
Tightening torque
muffler mounting bolt (c): 2.3 N·m (2.3 kgf-m, 16.5
lb-ft)
Muffler connecting bolt (d): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
Exhaust System Inspection
B827H11B06003
Inspect the exhaust pipe connection and muffler
connection for exhaust gas leakage and mounting
condition. If any defect are found, replace the exhaust
pipe assembly or muffler with a new one.
Check the exhaust pipe nuts (1), exhaust pipe mounting
bolt (2) muffler connecting bolt (3) and muffler mounting
bolts (4) are tightened to their specified torque.
Tightening torque
Exhaust pipe nut (a): 18 N·m (1.8 kgf-m, 13.0 lb-ft)
Exhaust pipe mounting bolt (b): 23 N·m (2.3 kgf-m,
16.5 lb-ft)
Muffler connecting bolt (c): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Muffler mounting bolt (d): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Spark Arrester Inspection
B827H11B06004
Refer to “Spark Arrester Cleaning in Section 0B
(Page 0B-7)”.
(a)
3
I827H11B0006-02
(b)
4
I827H11B0007-01
(c)
5
I827H11B0008-01
(d)
6
I827H11B0009-01
(a)
1
(b)
2
I827H11B0010-01
(a)
1
(a)
1
I827H11B0011-01
To Next Page
Loading...
