Suzuki LT-A400 - Specifications; Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material

Maintenance and Lubrication: 0B-22
Specifications
Tightening Torque Specifications
B827H10207002
NOTE
The specified tightening torque is also described in the following.
“Chassis Bolt and Nut Inspection (Page 0B-19)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List (LT-A400/F) in
Section 0C (Page 0C-9)”.
Special Tools and Equipment
Recommended Service Material
B827H10208001
NOTE
Required service material is also described in the following.
“Lubrication Points (Page 0B-2)”
Special Tool
B827H10208002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Exhaust pipe nut 18 1.8 13.0 )(Page 0B-4)
Exhaust pipe mounting bolt 23 2.3 16.5 )(Page 0B-4)
Muffler connecting bolt 23 2.3 16.5 )(Page 0B-4)
Muffler mounting bolt 23 2.3 16.5 )(Page 0B-4)
Valve clearance adjuster lock-nut 10 1.0 7.0 )(Page 0B-5)
TDC plug 23 2.3 16.5 )(Page 0B-5)
Spark plug 11 1.1 8.0 )(Page 0B-6)
Engine oil drain plug 23 2.3 16.5 )(Page 0B-8)
Oil filter 20 2.0 14.5 )(Page 0B-9)
Front drive (differential) gear oil level plug
80.8 6.0
)(Page 0B-9) /
)(Page 0B-10)
Front drive (differential) gear oil filler plug
35 3.5 25.5
)(Page 0B-9) /
)(Page 0B-10)
Front drive (differential) gear oil drain plug 32 3.2 23.0 )(Page 0B-10)
Final gear oil level plug
10 1.0 7.0
)(Page 0B-11) /
)(Page 0B-12)
Final gear oil filler plug
33 3.3 24.0
)(Page 0B-11) /
)(Page 0B-12)
Final gear oil drain plug 33 3.3 24.0 )(Page 0B-12)
Tie-rod lock-nut 29 2.9 21.0 )(Page 0B-19)
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — )(Page 0B-15)
09900–20803 09900–20805
Thickness gauge Tire depth gauge
)(Page 0B-5) / )(Page 0B-
6)
)(Page 0B-17)