Suzuki LT-A400 - Front Brake Master Cylinder Components; Front Brake Master Cylinder Assembly Removal and Installation

Brake Control System and Diagnosis: 4A-8
Front Brake Master Cylinder Components
B827H14106013
Front Brake Master Cylinder Assembly Removal
and Installation
B827H14106014
Removal
1) Drain brake fluid. Refer to “Brake Fluid Replacement
(Page 4A-6)”.
2) Remove the throttle case assembly. Refer to
“Handlebars Removal and Installation in Section 6B
(Page 6B-3)”.
3) Disconnect the front brake light switch lead coupler
(1).
1
2
3
4
5
6
(a)
7
(b)
(c)
10
(c)
9
FWD
FWD
FW
D
FWD
8
I827H1410039-02
1. Reservoir cap 7. Brake hose union bolt : 6 N⋅m (0.6 kgf-m, 4.5 lb-ft)
2. Diaphragm 8. Brake lever : Apply silicone grease.
3. Plate 9. Brake lever pivot bolt : Apply brake fluid.
4. Separator 10. Brake lever pivot bolt lock-nut : Do not reuse.
5. Master cylinder : 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
6. Piston/Cup set : 10 N⋅m (1.0 kgf-m, 7.0 lb-ft)
1
I827H1410019-01