Suzuki LT-A400 - Handlebars Removal and Installation

6B-3 Steering / Handlebar:
Handlebars Removal and Installation
B827H16206003
Removal
1) Remove the speedometer cover. Refer to
“Speedometer Removal and Installation in Section
9C (Page 9C-2)”.
2) Remove the throttle lever case (1), front brake
master cylinder (2) and right grip (3).
CAUTION
!
Do not turn the front brake master cylinder
upside down.
3) Remove the transfer lever assembly (4). (LT-A400F,
LT-F400F)
LT-A400F, LT-F400F
4) Remove the clamps.
5) Remove the left switch box (5) and rear brake lever
holder clamp bolt (6).
6) Remove the handlebar clamp bolts.
7) Remove the handlebar holders (7).
8) Remove the left grip (8), starter lever (9) and rear
brake lever holder (10) from the handlebars (11).
1
3
2
I827H1620002-01
4
I827H1620003-01
I827H1620004-01
5
6
I827H1620005-02
7
7
I827H1620006-01
8
9
10
11
I827H1620007-01