Suzuki LT-A400 - Page 115

Engine Mechanical: 1D-41
6) Remove the pin (6) and washer (7).
7) Remove the oil pump (8).
8) Remove the dowel pins.
Generator Rotor
1) Remove the generator rotor bolt with the special tool.
Special tool
(A): 09930–44541 (Rotor holder)
2) Install the special tool (attachment) to the crankshaft
end.
Special tool
(B): 09930–31921 (Rotor remover)
3) Remove the generator rotor (1) with the special tool.
Special tool
(C): 09930–30721 (Rotor remover)
Starter Driven Gear
1) Remove the generator rotor (1) with the special tool.
2) Remove the starter driven gear (2).
Crankcase
1) Remove the oil separator (1).
6
7
8
I827H1140138-01
(A)
I827H1140139-01
(B)
I827H1140140-01
1
(C)
I827H1140141-01
1
2
I827H1140142-01
1
I827H1140143-01