4C-4 Rear Brakes:
4) Disconnect the brake cables by removing the
adjuster nuts (3).
5) Disconnect the breather hose (4).
6) Loosen the drum cover bolts.
7) Remove the drum cover (5) with rear hub (6) by
using the slotted screwdriver.
8) Remove the rear hub (6) and dust seal (7) from the
drum cover (5).
NOTE
If there are wear or damage, remove the dust
seal (7). Refer to “Rear Brake Related Parts
Inspection (Page 4C-8)”.
9) Remove the O-ring (8) from the brake drum.
10) Remove the brake drum (9).
11) Remove the brake shoes and springs.
NOTE
If reinstalling the removed brake shoes, mark
the brake shoes with direction (leading and
trailing) of installation before removing them.
3
I827H1430002-01
4
I827H1430003-01
I827H1430004-01
5
6
I827H1430005-01
5
6
7
I827H1430006-02
8
8
9
I827H1430007-03
I827H1430008-01
To Next Page
Loading...
