GB.GOLDLP.170830
28 www.swegon.com
We reserve the right to alter specifications without notice.
INSTALLATION
FUNCTIONS
*FUNCTIONS*
TEMPERATURE
AIR FLOW/PRESSURE
FILTER
OPERATION
HEATING
COOLING
HUMIDITY
IN/OUTPUTS
IQnomic Plus
ALL YEAR COMFORT
OPTIMIZE
INSTALLATION
FUNCTIONS
*FUNCTIONS*
TEMPERATURE
AIR FLOW/PRESSURE
FILTER
OPERATION
HEATING
COOLING
HUMIDITY
IN/OUTPUTS
IQnomic Plus
ALL YEAR COMFORT
OPTIMIZE
* AIRFLOW/PRESSURE *
SA FAN REGULATION
EA FAN REGULATION
CLEAN AIR CONTROL
OUTDOOR TEMP COMP.
SA DOWN REGULATION
SLAVE CONTROL
* AIRFLOW/PRESSURE *
SA FAN REGULATION
EA FAN REGULATION
CLEAN AIR CONTROL
OUTDOOR TEMP COMP.
SA DOWN REGULATION
SLAVE CONTROL
9.3.3 Downspeed Control of Fan Speed to Min. Set
Point, Airflow/pressure
Regulation of the supply airflow to a lower flow rate is the
last step in the regulation sequence on increasing hea-
ting load for ERS regulation or supply air regulation. The
extract air fan cannot be selected alone; only the supply
air fan or both the supply air and extract air fans can be
selected.
See Section 9.2 as well.
An adjustable temperature decrease allows a lower supply
air temperature setpoint, before down regulation begins.
This neutral zone can be set on line NZ SA DOWN REGU-
LATION in the appropriate menu.
Settings:
Value Setting Factory
range settings
Function Inactive/SA/SA+EA Active
Neutral zone 0.0-10.0 °C 0.0 °C
9.3.4 To adjust the flow of the slave fan
It is possible to preset the set point of the slave fan to
provide a higher or lower airflow than the current airflow
of the controlling fan.
The deviation from the airflow of the controlling fan can
be preset by entering a COP. A cooling COP of 0.5 denotes
that the airflow of the slave will be 50% of the master
fan’s airflow.
Settings:
Value Setting Factory
range settings
Cooling COP 0.5-1.5 1,0
9.4 To Activate the GOLD SD Filter Monito-
ring Function
The filter monitoring function must be activated for the
filters that are to be monitored.
Settings:
Value Setting Factory
range settings
Standard filter Inactive/SA/EA SA+EA
SA+EA
Prefilter Inactive/SA/EA SA+EA
SA+EA
INSTALLATION
FUNCTIONS
*FUNCTIONS*
TEMPERATURE
AIR FLOW/PRESSURE
FILTER
OPERATION
HEATING
COOLING
HUMIDITY
IN/OUTPUTS
IQnomic Plus
ALL YEAR COMFORT
OPTIMIZE
To Next Page
Loading...
