Swift Group 2011 - Page 140

Equipment details
136
Cassette C-200 CW, C-200 CWE & C-200CS
The toilet section of the C-200 includes a
rotatable bowl, removable seat and cover,
a console with a flush handle/flush buttons,
a built in flush-watertank and a waste level
warning indicator. The valve blade handle is
located underneath the bowl.
Preparing for Use
1. Open access door pull retaining clip
upwards (fig. 1).
2. Remove holding tank by pulling straight out.
When holding tank hits the stop, tilt front
end downwards slightly and remove (fig. 2).
3. Position tank vertically and swivel pour out
spout upwards (fig. 3).
4. Remove the cap of the pour out spout. Add
required quantity of toilet fluid through pour-
out spout then add approx. 2 litres of water
through the spout to cover holding tank
bottom. Replace cap and return pour out
spout to its original stored position (fig. 4).
Note: Warmer weather or longer intervals
between emptying the waste tank may require
additional toilet fluid. Use only Thetford toilet
fluid to achieve the best results.
Caution: Never add toilet fluid directly into
toilet bowl.
1
2
3
4
5
6
7
8
10
11
9
9a
13
14
11a
12