Swift Group 2011 - Fiamma F65 Roof Mounted Awning

Equipment details
155
FIAMMA F65 ROOF MOUNTED
AWNING
BEFORE USING YOUR F65 ROOF MOUNTED
AWNING FULLY READ THE FIAMMA USER
INSTRUCTIONS SUPPLIED WITH YOUR
MOTORHOME (THE FOLLOWING IS A
GUIDE ONLY)
In order to avoid an unnecessary effort on the
awning, we suggest the legs are located to
the ground after 1m the canopy is extended.
According to the further unrolling the legs should
be moved forwards to assure a continuous
support of the awning.
Unscrew the leg to allow its sliding out of the
front profile.
Take the leg near its hinge-joint and pull it in a
horizontal direction.
l
By this action the hinge will come out of the
front profile and the leg will slide out and swing
downwards.
After unrolling the awning completely, fix the legs
at the chosen height.
To avoid that the awning could be taken up by
a sudden wind, causing a possible damage
to the vehicle by the swinging of the legs, it
is necessary to secure the legs to the ground
with the provided hooks. As a supplementary
security, we strongly advise to make use of a
storm cord at the upper side of each support leg
or to anchor the awning with the Fiamma Tie-
Down Kit strap.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 6