Equipment details
148
Avoid high speed (maximum speed
recommended is 130 km/h). Do not close the
blind more than 2/3 during the day (danger of
heat build up). Before starting off, Open the blind.
Care instructions
Clean the dome with the Seitz acrylic cleaner.
Opaque spots and light scratches on the dome
can be removed with the Seitz Acrylic Polish
and the Seitz Special Polishing cloth.
Use talcum powder regulary (4 times yearly) to
care for the rubber seals.
Clean the blinds only with water and mild soap
suds or a vacuum cleaner.
The guarantee becomes null and void
if the care and safety instructions are
not followed.
BLIND AND FLYSCREEN
The blind and flyscreen operate Independently
of each other and are engaged by connecting
to each other and sliding.
Safety precautions:
1. Repairs should be carried out only by
trained personnel.
2. Inform an approved dealer in case of
defects and malfunctions.
3. Before starting off, check the rooflight
for damage in the acrylic dome (tension
cracks) and the winding mechanism which
could arise owing to, for example, branches
and other natural causes.
4. Do not step in the acrylic dome.
5. Close the roof light before starting off
(check whether it is locked).
6. Do not leave the vehicle with the rooflight
open (danger of burglary or from rain).
7. Do not open in strong wind or rain.
8. Before opening, remove snow, ice, dirt, etc.
from the acrylic dome.
9. Malfunctions are to be repaired by an
approved dealer at once.
10. Do not use caustic detergents (danger of
tension cracks in the acrylic dome).
11. Do not operate whilst the vehicle is moving.
Care instructions:
- Please clean the acrylic panes with the
Seitz Acrylic Cleaner.
- Stains and light scratches on the acrylic
pane can be removed by using the Seitz
Acrylic Polish and the Seitz special
polishing cloth.
- Use talcum powder (4 times yearly) to care
for the rubber seals
- Clean the blinds only with water and mild
soap suds
- The guarantee becomes null and void if
these instructions are not followed.