‘En route’
24
REMOVAL OF FIAT/PEUGEOT
SPARE WHEEL:
a) the ground should be flat and
adequately firm.
b) turn the engine off and engage
the handbrake.
c) engage first gear or reverse.
Removal
a) wheel restraining device screw (fig 1) – rear
right side of vehicle
b) use the extension and wrench provided
to operate the wheel restraining device
screw (fig 2).
c) when the wheel is fully lowered (fig 3) and
the restraining device screw can turn no
more, use the wrench to pull the wheel
out (fig 4).
d) loosen the knob and remove the support to
release the wheel (fig 5 & 6).
Replacement
Replacement is a reversal of the
removal procedure.
Caution: Exercise care when handling the wheel
due to its weight.
Fig. 1
Fig. 3
Fig. 5
Fig. 2
Fig. 4
Fig. 6
To Next Page
Loading...
