EasyManua.ls Logo

Swift Group 2011 - Omnistep Slide-Out Step

Default Icon
179 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Equipment details
147
To close, turn the handle clockwise until
the dome lies on the seal and a resistance
is noticeable.
Before you start your journey, close the
rooflight by turning the handle to the
closed position
Please make sure that no persons or objects
are in the closing area of the rooflight.
Opening/closing the
blind and fly net
Pull the end rod from the
recessed part and push it
in a position you desire.
You can adjust the
incidence of light with the
second operating bar.
Safety precautions
Repairs should be carried
out only by trained
personnel. Inform an
approved dealer in case
of defects and malfunctions.
Before starting off, check the roof light for
damage in the dome (tension cracks) and the
opening mechanism which could arise owing
to, for example, branches and other natural
causes. Do not step on the screen.
Do not leave the vehicle with the roof light open
(danger of burglary and water penetration).
Do not open in strong wind, rain or snowfall.
Before opening, remove snow, ice, dirt etc.
from the dome.
Malfunctions must be repaired by an approved
dealer at once. Do not use caustic detergents
(danger of tension cracks in the dome).
Before setting off close the dome and check
the locking mechanism.

Table of Contents

Related product manuals