EN - 45
TYRES
Care should be taken to keep the tyres properly in-
flated. See "Technical data" chart at the beginning
of the manual for correct tyre inflation pressure.
Replace the tyre if its wear exceeds reference val-
ues on the table below.
MINIMUM HEIGHT
OF THE TREAD
FRONT 0,08 in.
REAR 0,08 in.
BRAKES
The key components of the braking systems are:
brake master cylinder with its lever (front) or pedal
(rear), brake lines, calliper assembly, disc and the
ABS control unit.
LEGEND
1. Front brake control lever
2. Front brake master cylinder with fluid reservoir
3. Front brake line
4. Front brake calliper
5. Front brake disc
6. Rear brake fluid reservoir
7. Rear brake line
8. Rear brake calliper
9. Rear brake disc
10. Rear brake master cylinder
11. Rear brake control pedal
12. ABS control unit
To Next Page
Loading...
