Symbol TC70 - Enabling Datawedge; Disabling Datawedge

To configure DataWedge refer to the TC70 Integrator Guide.
Enabling DataWedge
Procedure:
1
Touch
.
2
Touch
.
3 Touch .
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that DataWedge
is enabled.
6
Touch .
Disabling DataWedge
Procedure:
1
Touch
.
2
Touch
.
3 Touch .
4 Touch Settings.
5 Touch the DataWedge enabled checkbox. The blue checkmark disappears from the checkbox indicating that
DataWedge is disabled.
6
Touch .
86 | Data Capture
October 2014 | MN001120A01-A