Symbol TC70 - TC70 Wireless Connectivity; Connecting to Wi-Fi Networks

Chapter
5
Wireless
This section provides information on the wireless features:
• Wireless Local Area Network (WLAN)
• Bluetooth
Wireless Local Area Networks
Wireless local area networks (WLANs) allow the TC70 to communicate wirelessly inside a building. Before using the
TC70 on a WLAN, the facility must be set up with the required hardware to run the WLAN (sometimes known as
infrastructure). The infrastructure and the TC70 must both be properly configured to enable this communication.
Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches, Radius
servers, etc.) for instructions on how to set up the infrastructure.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless & networks settings
configure the TC70 to match the security scheme.
The TC70 supports the following WLAN security options:
• Open
• Wireless Equivalent Privacy (WEP).
• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK).
• Extensible Authentication Protocol (EAP).
The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status. See Status Bar on page 34 for
more information.
Note: Turn off Wi-Fi when not using it, to extend the life of the battery.
Scan and Connect to a Wi-Fi Network
Procedure:
1
Touch .
2
Touch .
87 | Wireless
MN001120A01-A | October 2014