Symmetricom TimeProvider 1100 User Manual

How to Use This Guide
xiv TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
Purpose of This Guide
The TimeProvider User’s Guide describes the procedures for unpacking, installing,
using, maintaining, and troubleshooting the Symmetricom TimeProvider. It also
includes appendixes that describe default values and how to install the included
software application SynCraft.
Who Should Read This Guide
Chapter 1, Overview of the TimeProvider, and Chapter 2, Engineering and Ordering
Procedures, are written for non-technical audiences who need general information
about the product. Chapter 3, Installing the TimeProvider and subsequent chapters
contain technical information about the product. Other chapters and appendixes
describe installation, maintenance, and configuration instructions or details primarily
intended for qualified maintenance personnel.
Structure of This Guide
This guide contains the following sections and appendixes:
Chapter, Title Description
Chapter 1, Overview of the
TimeProvider
Provides an overview of the product, describes the major
hardware and software features, and lists the system
specifications.
Chapter 2, Engineering and
Ordering Procedures
Lists the part number and ordering procedure for all
TimeProvider parts and accessories.
Chapter 3, Installing the
TimeProvider
Contains procedures for unpacking and installing the product.
Chapter 4, Provisioning the
TimeProvider
Describes
the TL1 commands required to provision the
TimeProvider after installing the unit.
Chapter 5, Testing the
TimeProvider
Provides checklist-based commissioning tests that should be
performed after completing turn-up and software configuration
to ensure the system is ready for normal operation.
Chapter 6, Maintaining and
Troubleshooting the TimeProvider
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Chapter 7, Specifications of the
TimeProvider
Lists the specifications for the TimeProvider
Appendix A, Factory Default
Values
Includes a list of the factory default values for hardware and
software parameters.
Appendix B, CRAFT Software
Reference
Describes how to use the CRAFT software interface with the
TimeProvider.
Index
Provides references to individual topics within this guide.

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English