Symmetricom TimeProvider 1100 User Manual

Appendix A Factory Default Values
Default Equipment Parameters
202 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
Default Equipment Parameters
RTM -related Alarms
S1LOS IMMEDNOMNMNMN
S2LOSIMMEDNONANANA
EXSLIP IMMED NO NA NA NA
RTMFAULT IMMED NO NA NA NA
Table A-3. Default Equipment Parameters
Parameter Default Value
System-Level Parameter (<aid>=SYS)
INACTTIME 0 (no timeout)
LOGECHO ENABLE
ELEVTIME DISABLE
SYSMODE SSU
Local/Remote Comm Port Parameters (<aid>=COMp)
AOMERGE ENABLE
BAUD 9600
ECHO DISABLE
FLOW NONE
TIDQUIET DISABLE
Ethernet Parameters (<aid>=COMI)
AOMERGE ENABLE
IPGATE 127.0.0.1
IPADDR 127.0.0.1
IPSUBNET 255.255.255.0
ECHO DISABLE
Table A-2. Default Alarm Settings (Continued)
Alarm ID
Default
Error Delay
Error Delay
Editable?
Default Alarm Level
SSU Mode PRR Mode SUB Mode

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English