Symmetricom TimeProvider 1100 User Manual

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
160 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
INPREF The specified input
has been set as the
system reference
EQPT PRS PRS | INP1 | INP2
IOCMODE The specified IOC
has become Active
EQPT ACTIVE ACTIVE | STANDBY
IOCSTATE The specified IOC
has been inserted
into the system. The
IOC is automatically
placed In-Service
EQPT INSRV INSRV – In service
The specified IOC
has been taken out of
service. The IOC can
no longer generate
alarms, be
provisioned, or
accept queries
OOSRV – Out of service
Communication
between the IMC and
IOC has failed
COMMFLT –
Communications fault
The specified IOC
has been removed
from the system
UNEQUIPPED
RESET The indicated IOC is
being restarted after
a user-requested
reset. All alarms are
cleared, if it was
Active, it becomes
Standby
EQPT n/a n/a
SYSMODE The system mode of
operation has been
changed
EQPT SSU SSU – Sync Supply Unit
mode
SUB – Subtending mode
PRR – Primary Reference
Receiver mode
IOC Clock Events
CLKFSTLK The local oscillator in
the specified IOC is
in Fast-Lock mode
EQPT n/a n/a
Table 6-5. Event Codes (Continued)
Event ID
Keyword
Description
AID
TYPE
Default Value/
Keyword
Description of Values

Symmetricom TimeProvider 1100 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1100
Category	Clock
Language	English