5
SYNRAD® 32-1 Operator’s Manual Version 2.2
Introduction
1
Introduction
Trademark, Copyright & Warranty information
Guidelines and contents description
32-1 Nomenclature
Important
Note:
This Operation Manual explains operation activities related to 32-1
lasers. If you can-
not operate the unit using the information described in this manual, contact SYNRAD®
(+1.425.349.3500) or an authorized SYNRAD Distributor.
Do not lift or support the laser by its cooling fittings.
Failure to properly package the laser using SYNRAD shipping box and foam/cardboard inserts
as shown in Packaging Instructions may void the warranty. Customers may incur additional
repair charges due to shipping damage caused by improper packaging.
Before beginning any maintenance or inspections of your 32-1 laser, be sure to completely
disable the laser by disconnecting the DC Power cable (or cables) from the rear of the laser.
Caution
SYNRAD does not recommend vertical or head down configurations.
Please contact the factory for limitations as a vertical orientation increases
the risk of damage to the lasers optics.
A risk of exposure to toxic elements may result when certain optical or
beam delivery components are damaged. In the event of damage to laser,
marking head, or beam delivery optics, contact SYNRAD®, or the optics
manufacturer for handling instructions.
If you operate your laser dirty or dusty environments, contact SYNRAD
about the risks of doing so and precautions you can take to increase the
longevity of your laser, marking head, and associated optical components.
Possible
Equipment
Damage
To Next Page
Loading...
