laser safety
5
Synrad
Series 48Series 48
Series 48Series 48
Series 48 operator’s manual
48-2 label locations
Figure 2 48-2 hazard label and CE label locations
BOTTOM VIEW
KEYSWITCH VERSION OR OEM VERSION
INVISIBLE LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
75 WATTS MAX
10200–10800 nm
EN-60825-1, 1993
KEYSWITCH VERSION ONLY
CAUTION
CONDENSATION AND
WATER DAMAGE CAN
OCCUR IF COOLING WATER
IS BELOW DEW POINT.
SEE OPERATION MANUAL.
CAUTION
These RF Excited Lasers must be provided with a
pre-ionizing "Tickle" signal during standby or
laser "low" periods. This is automatically provided
with Synrad's UC Series power controller. This signal
keeps the plasma ionized during laser "low" periods
and facilitates breakdown and pulse to pulse fidelity.
Damage or malfunction may occur if this or
equivalent drive signals are not used. See manual
for tickle pulse specifications or contact factory.
SYNRAD
MODEL#: J48-2W
INPUT POWER: 30 VDC
MFG: October 08, 2001
4600 Campus Place, Mukilteo WA 98275 (425)349-3500
Ser#:
0481281010390
MADE IN THE U.S.A.
IMPORTANT - DB9 wiring change. Pins 3 and 4
now provide the remote interlock function and pins
6 and 7 now provide the remote
keyswitch function. If unused
these pins must be jumpered
for the laser to operate. Refer
to manual for details.
REMOTE KEYSWITCH JUMPER
12 34 5
6789
REMOTE INTERLOCK JUMPER
This laser product is manufactured under
one or more of the following U.S. Patents:
4,805,182 5,065,405 6,195,379
4,837,772 5,215,864 6,198,758
5,008,894 5,602,865 6,198,759
Other U.S. and International Patents pending.
This laser manufactured by
Synrad, Inc
Mukilteo, WA 98275
complies with 21 CFR subchapter J
at the date of manufacture.
This laser is for use as a component only.
It does not comply with standards for
complete laser products specified by
21 CFR 1040 or EN 60825.
INVISIBLE LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
75 WATTS MAX
10200–10800 nm
EN-60825-1, 1993
This laser product is manufactured under
one or more of the following U.S. Patents:
4,805,182 5,065,405 6,195,379
4,837,772 5,215,864 6,198,758
5,008,894 5,602,865 6,198,759
Other U.S. and International Patents pending.
CAUTION
CONDENSATION AND
WATER DAMAGE CAN
OCCUR IF COOLING WATER
IS BELOW DEW POINT.
SEE OPERATION MANUAL.
SYNRAD
MODEL#: J48-2W
INPUT POWER: 30 VDC
MFG: October 08, 2001
4600 Campus Place, Mukilteo WA 98275 (425)349-3500
Ser#:
0481281010390
CAUTION
These RF Excited Lasers must be provided with a
pre-ionizing "Tickle" signal during standby or
laser "low" periods. This is automatically provided
with Synrad's UC Series power controller. This signal
keeps the plasma ionized during laser "low" periods
and facilitates breakdown and pulse to pulse fidelity.
Damage or malfunction may occur if this or
equivalent drive signals are not used. See manual
for tickle pulse specifications or contact factory.
TOP VIEW
MADE IN THE U.S.A.
IMPORTANT - DB9 wiring change. Pins 3 and 4
now provide the remote interlock function and pins
6 and 7 now provide the remote
keyswitch function. If unused
these pins must be jumpered
for the laser to operate. Refer
to manual for details.
REMOTE KEYSWITCH JUMPER
12 34 5
6789
REMOTE INTERLOCK JUMPER
This laser manufactured by
Synrad, Inc
Mukilteo, WA 98275
complies with 21 CFR subchapter J
at the date of manufacture.
WATER-COOLED VERSION ONLY
10.6 MICRON
75 WATTS MAX
9229–9317 nm
EN-60825-1, 1993
9.3 MICRON
To Next Page
Loading...
