Synrad 48 Series - Model 48-1 Package Outline Drawing; Figure 3-10 Model 48-1 Package Outline and Mounting Dimensions

technical reference
320
Synrad
Series 48Series 48
Series 48Series 48
Series 48 operator’s manual
Model 48-1 package outline drawing
Figure 3-10 Model 48-1 package outline and mounting dimensions
2.40
3.40
2X .64
2.76
18.13
2.80
16.85
1.600 1.500
1.125
2.40
.93
5X 3.00
.30
4.15
1.08
.59
.800
NOTES:
1. DO NOT USE COVER SCREW HOLES TO SUPPORT LASER WEIGHT.
DO NOT USE OPTIONAL ACCESSORIES MOUNTING HOLES TO MOUNT LASER.
LASER IS MOUNTED BY REMOVING COVER SCREWS AND REPLACING WITH APPROPRIATE LENGTH
SCREWS FOR YOUR MOUNTING APPLICATION. USE A MINIMUM OF FOUR SCREWS IN A SYMMETRICAL
PATTERN TO PROPERLY DISTRIBUTE MOUNTING FORCES. DO NOT REMOVE COVER.
4. WEIGHT: 9 LBS
BEAM EXIT
UC-2000 POWER
DB9 INPUT
DC POWER CORDS
SIDE VIEW
BOTTOM VIEW
4X REMOVEABLE FEET
BEAM EXIT ON
12X 6-32 x .30 SCREW DEPTH (WITH COVER) COVER SCREWS
CTRL
FUSE
KEY
REAR VIEW
PWR
LASE
FRONT VIEW
SHUTTER
6X 8-32 OPTIONAL ACCESSORIES MOUNTING HOLES
2
3
OPTIONAL ACCESSORIES POWER OUTPUT
2
3
TOLERANCES UNLESS NOTED:
.x = ±0.1
.xx = ±0.01
.xxx = ±0.005
ANGLE = ±1.0˚
MATERIAL:
. . FINISH: . . .
PROPRIETARY
THIS DRAWING IS PROPRIETARY TO
SYNRAD INC. AND SHALL NOT BE
USED OR DISCLOSED IN WHOLE
OR IN PART WITHOUT WRITTEN
PERMISSION OF SYNRAD INC.
DESCRIPTION:
PART NUMBER: SHEET
1 OF 1
UNITS: INCHES SIZE:
B
DB: CATEGORY: FINISH CLASS:
48-1
OUTLINE AND MOUNTING, 48-1
DWG/FILE NUMBER: 16048 DRAWN BY: CHECKED BY: APPROVED BY:
DATE: 19-Feb-96 DATE: DATE:
Pro/E
SYNRAD INC. 4600 Campus Place Mukilteo, WA 98275 Phone: (425)349-3500 Fax: (425)349-3667
F
REV ECO
606
DATE DESCRIPTION
ADDED .8 BEAM EXIT DIM
DB
19-Feb-96