Synrad 48 Series - Getting Started

1
getting started
11
Synrad
Series 48Series 48
Series 48Series 48
Series 48 operator’s manual
Use information in this section to prepare your Series 48 laser for operation. The order of
information presented in this section is the same as the order of tasks that you need to
perform. The best way to get your laser ready for operation is to start at Unpacking and
work your way through Connecting.
This section contains the following information:
■ Introduction – introduces Series 48 lasers and lists important features.
■ Unpacking – provides important information about shipping your Series 48 laser.
■ Inventory – displays and describes all components shipped with your laser.
■ Mounting – describes how to attach laser components to a mounting surface.
■ Connecting – explains how to connect power and control cables as well as cooling
connections for water-cooled models.