Synrad 48 Series - Model 48-5 Package Outline Drawing; Figure 3-12 Model 48-5 Package Outline and Mounting Dimensions

technical reference
322
Synrad
Series 48Series 48
Series 48Series 48
Series 48 operator’s manual
TOLERANCES UNLESS NOTED:
.x = ±0.1
.xx = ±0.01
.xxx = ±0.005
ANGLE = ±1.0˚
MATERIAL:
. . FINISH: . . .
PROPRIETARY
THIS DRAWING IS PROPRIETARY TO
SYNRAD INC. AND SHALL NOT BE
USED OR DISCLOSED IN WHOLE
OR IN PART WITHOUT WRITTEN
PERMISSION OF SYNRAD INC.
DESCRIPTION:
PART NUMBER: SHEET
1 OF 1
UNITS: INCHES SIZE:
B
DB: CATEGORY: FINISH CLASS:
48-5
OUTLINE AND MOUNTING, 48-5
DWG/FILE NUMBER: 16110 DRAWN BY: CHECKED BY: APPROVED BY:
DATE: DATE: DATE:
Pro/E
SYNRAD INC. 6500 Harbour Heights Pkwy Mukilteo, WA 98275 Phone: (425)349-3500 Fax: (425)485-4882
D
REV ECO
606
DATE DESCRIPTION
REDIMED ENDPLATES, ADDED NOTE 2, AND REMOVED LABELS.
DB
2-26-96
5 SEC DELAY
CTRL 1
ON
POWER POWER
FUSE 1
CTRL 2
STATUS
LASE
FUSE 2
LASE
CARBON DIOXIDE LASER
CARBON DIOXIDE LASER
INVISIBLE LASER RADIATION
IS EMITTED FROM THIS
APERTURE
AVOID EXPOSURE
Duo•Lase
®
SYNRAD
Duo•Lase
®
SYNRAD
1.600
1.500
.800
1.125
C
L
5.60
NOTES:
DO NOT USE OPTIONAL ACCESSORIES MOUNTING HOLES TO MOUNT LASER.
TOP VIEW
SIDE VIEW
BOTTOM VIEW
2.85
1.47
BEAM EXIT
8-32 6 PLACES
1
1
1.33
BEAM
L
C
SHUTTER
FUSE 1
FUSE 2
KEY SWITCH
CTRL2
CTRL1
FRONT VIEW
REAR VIEW
LASER. MORE THAN 1/8" INTO INTERIOR OF DO NOT ALLOW SCREW TO PENETRATE 10-32 MOUNTING SCREWS 9 PLACES.
.000
.000
3X 1.375 3X 4.225
32.505
33.417
34.364
.000
.000
2.115
2X 2.715
11.215
2X 18.925
2X 27.215
32.715
34.850
4.08
4.45
Model 48-5 package outline drawing
Figure 3-12 Model 48-5 package outline and mounting dimensions