Synrad 48 Series - Model 48-2 Package Outline Drawing; Figure 3-11 Model 48-2 Package Outline and Mounting Dimensions

technical reference
321
Synrad
Series 48Series 48
Series 48Series 48
Series 48 operator’s manual
Model 48-2 package outline drawing
Figure 3-11 Model 48-2 package outline and mounting dimensions
TOLERANCES UNLESS NOTED:
.x = ±0.1
.xx = ±0.01
.xxx = ±0.005
ANGLE = ±1.0˚
MATERIAL:
. . FINISH: . . .
PROPRIETARY
THIS DRAWING IS PROPRIETARY TO
SYNRAD INC. AND SHALL NOT BE
USED OR DISCLOSED IN WHOLE
OR IN PART WITHOUT WRITTEN
PERMISSION OF SYNRAD INC.
DESCRIPTION:
PART NUMBER: SHEET
1 OF 1
UNITS: INCHES SIZE:
B
DB: CATEGORY: FINISH CLASS:
48-2
OUTLINE AND MOUNTING, 48-2
DWG/FILE NUMBER: 16364 DRAWN BY: CHECKED BY: APPROVED BY:
DATE: DATE: DATE:
Pro/E
SYNRAD INC. 6500 Harbour Heights Pkwy Mukilteo, WA 98275 Phone: (425)349-3500 Fax: (425)485-4882
D
REV ECO
606
DATE DESCRIPTION
ADDED .8 BEAM EXIT DIM
DB
16-Feb-96
31.85
33.13
2.80
2.40
3.40
2.76
.30
2X .64
.93 11X 3.00
2.40
4.15
1.500 1.600
1.125
1.08
.59
.800
BEAM EXIT
ON
4X REMOVEABLE FEET
22X 6-32 X .30 SCREW DEPTH (WITH COVER)
COVER HOLES
BOTTOM VIEW
DC POWER CORDS
DB9 INPUT
UC-2000 POWER
SIDE VIEW
KEY
CONTROL
FUSE
REAR VIEW
PWR
LASE
BEAM EXIT
FRONT VIEW
SHUTTER
6X 8-32
OPTIONAL ACCESSORIES
MOUNTING HOLES
OPTIONAL ACCESSORIES POWER OUPUT
2
3
NOTES:
1. DO NOT USE COVER SCREW HOLES TO SUPPORT LASER WEIGHT.
DO NOT USE OPTIONAL ACCESSORIES MOUNTING HOLES TO MOUNT LASER.
LASER IS MOUNTED BY REMOVING COVER SCREWS AND REPLACING WITH APPROPRIATE LENGTH
SCREWS FOR YOUR MOUNTING APPLICATION. USE A MINIMUM OF FOUR SCREWS IN A SYMMETRICAL
PATTERN TO PROPERLY DISTRIBUTE MOUNTING FORCES. DO NOT REMOVE COVER.
4. WEIGHT: 18 LBS
2
3