Sys Tec Electronic GW-003

To Next Page

To Previous Page

CAN – Ethernet Gateway

18 © SYS TEC electronic GmbH 2007 L-1032e_9

ipcfg 192.168.10.117 255.255.255.0 192.168.10.1

• Set the CAN bitrate and the CAN identifier for error messages,

(refer to section

4.2.4)

for example: to 125 kBit/s and CAN identifier 0x81

/if/can0 baud:4 canid:81 on

• Save the configuration file under a different name,

for example

UdpServer_1CAN_117.txt

The generated configuration file is written to the CAN-Ethernet

Gateway as follows:

1. Change to the directory /save

/ >cd /save↵

/save >

2. Erase the existing configuration file rc

/save >rm rc↵

/save >sync↵

Sys Tec Electronic GW-003 - Page 26