Sys Tec Electronic GW-003 - Version; Exit; Reset

Device Functions
© SYS TEC electronic GmbH 2007 L-1032e_9 45
4.5.9 version
Format:
version
Description: The
version command returns the current firmware
version number for the CAN-Ethernet Gateway and the
MAC
5
address.
Example:
/ > version↵
SYSTEC CAN-ethernet-gateway V1.0.720
MAC: 0x00:0x40:0xDC:0x00:0x0E:0xD3
/ >
4.5.10 exit
Format:
exit
Description: The
exit command terminates an on going Telnet
session. The same can be achieved by entering
Crtl+D.
4.5.11 reset
Format:
reset
Description: The
reset command resets the CAN-Ethernet
Gateway (software reset). Depending on the "DEFT"
DIP switch position the corresponding configuration
script will be loaded.
5
MAC: Media Access Control: Unique Ethernet address for each CAN-Ethernet Gateway.
Each device with an Ethernet controller has its own MAC address.