7.0 SERIAL COMMUNICATIONS VIA USB
The USB port is a bi-directional high-speed communications port which allows operator intervention via
a communication utility called Systech Illinois Client Utility. This communication utility is included on
the flash drive supplied with the analyzer, along with a USB data connection cable.
If you do not have the flash drive, the software can be downloaded from our website. Please contact
Systech Illinois to obtain the utility. The USB data communication cable is a standard USB A to USB B
cable.
However, before the USB cable is plugged into your PC you MUST install the necessary driver
software.
7.1 Installing the USB Driver Software
Plug the flash drive into a USB port on a PC. Open the drive directory using Windows Explorer and
double click on and then click on Client Software as shown below:
To Next Page
Loading...
Need help?
General