Gaspace 6000 Operations Manual v1.4
10.0 ERROR / MESSAGE CODES
If a fault is detected, a message will appear on the instruments' display. A table follows that lists these
fault messages along with their descriptions.
Instrument is in heating mode. Furnace temperature has not yet
reached operating temperature.
Low furnace temperature alarm. Furnace temperature has fallen below
operating temperature, flow through the analyzer is too high, or the
furnace has failed.
High furnace temperature alarm. Furnace temperature has risen above
operating temperature.
Signifies error in inputting new data.
Indicates instrument cannot calibrate to the value entered in "CAL", or
function is not allowed when in menu.
To Next Page
Loading...