Running Experiments
3–6 TA I
NSTRUMENTS
TGA 2050
Weight Calibration
TGA weight calibration uses standard reference
weights to calibrate the accuracy of the TGA
balance system. This calibration is conducted
through the controller.
Running a
TGA Experiment
Experimental Procedure
All of your TGA experiments will have the
following general outline.
Selecting and preparing a sample. This
involves preparing a sample of the
appropriate size, selecting the sample cup,
and placing the sample in the cup.
Taring and loading the sample cup on the
balance.
Entering experimental information through
the TA controller.
Creating and selecting the thermal method
on the controller.
Setting up any external accessories.
Starting the experiment.