Safety instructions
19
Careful when cleaning with compressed air cleaner
The machine can partly be cleaned with compressed air. Clean elec-
tric parts and the hydraulic valve block with low pressure only. Too high
pressure can damage these parts.
No aggressive wax additives
When cleaning do not use aggressive wax additives. Bright metal sur-
faces can get damaged.
Before welding work
Before welding to the hitched machine, untie the tractor’s battery and
the dynamo. Therefore you will avoid damages to the electrical instal-
lation.
Tighten bolted links
After care and maintenance work all loose bolted links must be tight-
ened. Because of loose bolted links material damages can be caused.
Further prescrip-
tions
Observe the prescriptions
Please observe besides these safety instructions
• the accident prevention prescriptions
• the general accredited safety-technical, industrial medicinal and
road traffic law rules
• the tips in this operation manual
• the work, care and maintenance prescriptions
To Next Page
Loading...